All Outlaw Modified participants acting in their capacity as such, are and shall be independent contractors, and not agents, servants, or employees of Outlaw Modified. Outlaw Modified members shall use their own methods in performing their duties in accordance with Outlaw Modified rules, as they may be amended from time to time. It shall be the participants obligation to furnish any tools, supplies, or materials they deem necessary to perform their duties. The participants shall be responsible for all actions of their employees or agents. The participants assume and take full responsibility for reporting and paying to the appropriate authorities all charges, premiums, and taxes.
Director of Outlaw Modified may suspend for a definite or indefinite period of time or may terminate a license in the interest of Outlaw Modified.
Licenses and numbers expire on the last day of the calendar year in which that license was issued. Numbers are protected until February 1st of the following calendar year. Licensing fee must be paid in full by that date. Make all checks payable to: Outlaw Modifieds or it's designee. A license does not guarantee car number for non-participating cars. You must have raced in the previous year to protect your number. Second year requires that you have participated (ie: taken a green flag lap) in at lease two (2) races by season end.
Rain-Outs - 50% of the event laps will constitute the completion of that event. If the second half of a two event race is not completed, the next scheduled race completed will constitues it's completion. We do not reschedule rain-outs or missed races.
Driver can not change cars after the 1st green flag of feature.
THE CAR:
Any aftermarket fabricated chassis whose wheelbase is greater than 87 inches and less than 102 inches, and whose track width is no greater than 76 inches. the frame rails may be no less than 2 x 2 square tube steel with a wall thickness greater than .090. The roll cage must be constructed of 1.5 inch or larger steel tube with a wall thickness of greater than .090.
Three side bars are required on the drivers side not including the main rail. Two side bars are required on the right side not including the main rail. All openings between the driver's side door bars must be filled with steel plate of at least 1/16 thickness. Plating must cover all openings from driver's feet to the back of the seat.
Driver's door bars may not exceed 6 inches when measured from the outside of the left main rail.
